咨询热线:

0531-88771136

您的当前位置: 首页 > 新闻中心 > 正文

beplay全站app安卓在进行抛光工序时要注意什么呢?

来源:http://www.jnhjgs.cn     发布时间:2021-07-19 11:39:17    点击:

以现代的工业情况来看,每个beplay全站app安卓加工完以后都会进行抛光打磨,这道工序会使beplay全站app安卓的外表更加好看,并且会使使用效果提升,那么抛光时要注意哪些呢?
According to the modern industrial situation, every mold will be polished after processing. This process will make the appearance of the mold more beautiful and improve the use effect. What should we pay attention to when polishing?
抛光过后的beplay全站app安卓粗糙度会更低,平整度与光滑度都会更高,表面看着更亮。
After polishing, the roughness of the mold will be lower, the flatness and smoothness will be higher, and the surface will look brighter.
                   济南beplay全站app安卓
抛光时应注意的:首先应在较为通风的场所,因为抛光时会造成一些粉尘,如果较为封闭,粉尘容易落到石膏上,会使表面的光滑度降低;并且给beplay全站app安卓进行抛光时需要按照角度、边缘或是其他部分开始,但是都要注意防尘。
When polishing, attention should be paid: first, it should be in a relatively ventilated place, because polishing will cause some dust. If it is closed, the dust is easy to fall on the gypsum, which will reduce the smoothness of the surface; And to mold polishing needs to start according to the angle, edge or other parts, but should pay attention to dust.
每次钻头应当更换时洗手和工件,调整为适合抛光工具钻孔石膏的尺寸和硬度的抛光压力。
Every time the drill bit should be replaced, wash hands and work pieces should be adjusted to the polishing pressure suitable for the size and hardness of the drilling gypsum of the polishing tool.
联系我们 contact

山东济南beplay全站app安卓_铝合金压铸厂-山东宏捷beplay全站app安卓有限公司

电话1:13173017488

电话2:18615459955

传真:0531-88771136

邮箱:hlm369@126.com

地址:山东省济南市大桥镇大王村北跨商务中心后三层白楼

山东济南beplay全站app安卓_铝合金压铸厂-山东宏捷beplay全站app安卓有限公司 手机: 13173017488 咨询热线: 0531-88771136 咨询热线:18615459955    邮箱:hlm369@126.com

公司地址: 山东省济南市大桥镇大王村北跨商务中心后三层白楼